Sony PSP-1001 Handheld Game System User Manual


 
10
Precautions
When using the PSP® system's 'Scan' function to select the wireless
LAN access point, access points that are not intended for public use
may be displayed. Only connect to a personal access point that you are
authorized to use, or one that is available through a public wireless
LAN or hotspot service. User is responsible for all fees associated with
wireless LAN access.
Depending on the country, there are limitations on the use of certain
types of radio waves. In some cases, use of the system may lead to a
fine or other penalty.
If the PSP® system or UMD™ is brought directly from a cold location
to a warm one, moisture may condense on the lens inside the system or
on the UMD™. Should this occur, the system may not operate
properly. In this case, remove the UMD™ and turn off and unplug the
system. Do not put the UMD™ back in until the moisture evaporates
(this may take several hours). If the system still does not operate
properly, contact our technical support line at 1-800-345-7669 for
assistance.
Do not touch the opening on the rear of the disc (recorded surface of
the disc) with your fingers.
Do not allow dust, sand, foreign objects or other types of dirt to get
on the disc.
If the UMD™ becomes dirty, gently wipe the exterior and recorded
surfaces of the UMD™ using a soft cloth. Do not use solvents or
other chemicals.
Do not use a UMD™ that is cracked or warped or has been repaired.
The UMD™ may break inside the PSP® system, leading to injury or
malfunction.
Follow the guidelines listed below to help avoid deterioration or
discoloration of the PSP® system:
Do not use solvents or other chemicals to clean the exterior surface.
Do not allow the system to remain in direct contact with rubber or
vinyl products for an extended period of time.
Do not use a chemically-treated cleaning cloth to wipe off the
system.
For best results, go to (Settings) (System Settings) and
then with the "System Information" screen displayed, rotate the analog
stick in a circular motion. This will adjust the analog stick's range of
movement.
Using the access point
Overseas use
Moisture condensation
UMD™ handling
Use and handling of the system
Before using the analog stick