Sharp LC-37XD1E Video Games User Manual


 
23
DTV On-Screen Display
Example
1
Language
• To customise the language preference for audio and
MHEG5 application.
2
Programme Setup
• To confi gure various settings for each service. These
include: Fav(ourite), Lock, Move, Move To, Skip,
Select, Erase, Label, and View functions.
3
Installation
• To scan all services available in your area, or to label/
erase/re-scan the selected carrier.
4
System Setup
• To confi gure On-Screen Display and Child Lock
settings.
5
Accessories
• To display the current version of the software or to
allow the software upgrade to take place.
6
Common Interface
• To display the current Common Interface details.
7
Navigation buttons
• To navigate within the DTV Menu screen.
DTV menu operations
[
: Press to display the subtitle selection screen.
m
: Press to display TELETEXT or start the MHEG5
presentation, if available.
- : Aside from direct channel entry, each of the
- numeric buttons have a unique
function assigned in the Programme Setup
screen.
DTV: Press to access DTV mode.
EPG: Press to open the EPG screen.
ESG: Press to open the ESG screen.
RADIO: Press to switch between TV and RADIO mode.
• Due to large variation in transmitted volume
levels in RADIO mode, some stations will
produce distortion if the volume level is set
too high.
2
: Press to open the multi audio screen.
DTV MENU: Press to open or close the DTV Menu screen.
LIST: Press to open the Programme List.
p
: Press to open the service banner or view
detailed information from the EPG/ESG screen.
a
/
b
/
c
/
d
: Press to select a desired item on the screen or
adjust a selected item.
OK: Press to go to the next step or complete the
setting.
Press to open the Programme list when no
other menu screen is active. (Except external
input.)
END: Press to exit the current menu screen without
saving the changes.
Colour: Each of the coloured buttons have a unique
function assigned in the menu screen.
RETURN: Press to return to the previous step.
DTV menu operation buttons
Use the following buttons on the remote control unit to
operate the DTV Menu.
DTV common operations
DTV common menu operation
Press DTV or
b
to access the DTV mode.
Press DTV MENU and the DTV Menu screen
displays.
Press
c
/
d
to select the desired menu, and
then press OK if necessary.
• From this point, menu operations differ depending on
the item you are going to adjust. See the respective
section of the menu operation.
• You cannot select any DTV-related menu items
unless “Auto Installation” has been completed.
• Press RADIO to switch between DTV and Radio
mode.
• To exit the current screen without saving the change,
press END.
1
2
3
DTV MENU / Language
Select
OK ENDDTV MENU
1
34 652
7
LC-42XD1E_gb_c.indd 23LC-42XD1E_gb_c.indd 23 2006/10/27 10:22:332006/10/27 10:22:33