Filter
Top Products
55
Before performing between-cabinets connection work, be sure to turn the Power
SW OFF and unplug the power plug from the wall socket. Failure to observe this
can cause electric shock and/or short circuit accidents.
Perform assembling as shown in this manual. Erroneous assembling can cause
electric shock accidents and malfunctioning.
16. COMMUNICATION PLAY
By linking 4 machines, up to 4 persons can play simultaneously. Although accessory parts are to be installed for
communication play, some of the parts will remain as spares.
16 - 1 INSTALLATION PRECAUTIONS
Simplemultiple machines are to be linked, sufficient
power corresponding to the number of machines used
need to be supplied. As standard, amperage is 7A
(AC100~110~120V area).
Due to the parts used for communication play, interval
between machines is 20 cm. If parts are not installed,
adjascent players will come nto contact with each other
and this can cause accidents and trouble.
The Communication Cable is optic-fiber made and will break if excessively bent.
Handle with care.
16 - 2 CONNECTING THE COMMUNICATION CABLES
Connect machines with the protective tube and pass the communication cable in the tube. Depending on the number of
machine units to be linked, connect the communication cables (optic-fiber cables) in a manner shown in the following
figures.
1
2