Filter
Top Products
36
Do not touch places other than those specified. Touching placers not specified can
cause an electric shock and /or short circuit accident.
V.R. ADJUSTMENT
Loosen the 2 screws which secure the V.R.
Bracket to move the V.R. Bracket.
Move the V.R. Bracket to disengage ADJUST
GEAR mesh and move the V.R. shaft in the
manner so that the V.R. shaft cut portion faces
the oppisite side of ADJUST GEAR as shown.
Have the gears meshed and tighten the 2
screws.
Carefully turn the Handle Shaft to left/right
and check to ensure the value variation is
within the mobile range of the Volume.
After finishing adjustments, be sure to perform
Volume Setting in Test Mode.
1
2
3
4
5
Take out the 2 screws which secure the Volume
Bracket to remove the Volume Bracket.
Remove the Volume Gear fromt he V.R. to
replace the V.R.
After the replacement, perform Volume Setting
in the Test Mode.
1
2
3
V.R. REPLACEMENT
SCREW (2)
M4x8
V.R. SHAFT
ADJUST GEAR
V.R. BRACKET
GEAR
SCREW (2)
M4x8
HANDLE V.R.