Filter
Top Products
MIDI Implementation
31
●0156: Gate Reverb
This is a special type of reverb in which the reverberant sound is cut o before its
natural length.
No Parameter Value Description
1 Type #1 0–3
Normal,
Reverse,
Sweep1,
Sweep2
Type of reverb
Normal: conventional gated
reverb
Reverse: backwards reverb
Sweep1: the reverberant
sound moves from right to left
Sweep2: the reverberant
sound moves from left to right
2 Pre Delay 0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
reverb sound is heard.
3 Gate Time 0–99 5–500 ms
Adjusts the time from when
the reverb is heard until it
disappears.
4 Low Gain 0–30 -15–+15 dB Gain of the low range
5 High Gain 0–30 -15–+15 dB Gain of the high range
6 Balance #2 0–100
D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
reverb sound (W)
7 Level 0–127 0–127 Output Level
●0200: Overdrive Chorus
This e ect connects an overdrive and a chorus in series.
No Parameter Value Description
1
Overdrive
Drive
0–127 0–127
Degree of distortion
Also changes the volume.
2
Overdrive
Pan
0–127 L64–63R
Stereo location of the
overdrive sound
3
Chorus Pre
Delay
0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
4
Chorus Rate
Mode
0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
5
Chorus Rate
#1
1–127
0.05–10.00
Hz
Frequency of modulation (Hz)
6 Chorus Rate 0–21 note
Frequency of modulation
(note)
7
Chorus
Depth
0–127 0–127 Depth of modulation
8
Chorus
Balance #2
0–100
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the chorus (W)
and the sound that is not sent
through the chorus (D).
9 Level 0–127 0–127 Output Level
●0201: Overdrive Flanger
This e ect connects an overdrive and a anger in series.
No Parameter Value Description
1
Overdrive
Drive
0–127 0–127
Degree of distortion
Also changes the volume.
2
Overdrive
Pan
0–127 L64–63R
Stereo location of the
overdrive sound
3
Flanger Pre
Delay
0–125 0.0–100.0 ms
Adjusts the delay time from
when the direct sound begins
until the anger sound is
heard.
4
Flanger Rate
Mode
0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
5
Flanger Rate
#1
1–127
0.05–10.00
Hz
Frequency of modulation (Hz)
No Parameter Value Description
6 Flanger Rate 0–21 note
Frequency of modulation
(note)
7
Flanger
Depth
0–127 0–127 Depth of modulation
8
Flanger
Feedback
0–98 -98–+98%
Adjusts the proportion of the
anger sound that is fed back
into the e ect. Negative (-)
settings will invert the phase.
9
Flanger
Balance #2
0–100
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the anger (W)
and the sound that is not sent
through the anger (D).
10 Level 0–127 0–127 Output Level
●0202: Overdrive Delay
This e ect connects an overdrive and a delay in series.
No Parameter Value Description
1
Overdrive
Drive #1
0–127 0–127
Degree of distortion
Also changes the volume.
2
Overdrive
Pan
0–127 L64–63R
Stereo location of the
overdrive sound
3 Delay Mode 0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
4 Delay Time 0–127 1–2540 ms
Adjusts the delay time from
the direct sound until the
delay sound is heard. (ms)
5 Delay Time 0–21 note
Adjusts the delay time from
the direct sound until the
delay sound is heard. (note)
6
Delay
Feedback
49–89 0–+80%
Adjusts the proportion of the
delay sound that is fed back
into the e ect.
7
Delay HF
Damp
0–17
200–8000 Hz,
Bypass
Adjusts the frequency above
which sound fed back to
the e ect will be cut. If you
do not want to cut the high
frequencies, set this parameter
to Bypass.
8
Delay
Balance #2
0–100
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not sent
through the delay (D).
9 Level 0–127 0–127 Output Level
●0203: Distortion Chorus
The parameters are essentially the same as in “Overdrive Chorus,” with the
exception of the following two.
Overdrive Drive Distortion Drive
Overdrive Pan Distortion Pan
●0204: Distortion Flanger
The parameters are essentially the same as in “Overdrive Flanger,” with the
exception of the following two.
Overdrive Drive Distortion Drive
Overdrive Pan Distortion Pan
●0205: Distortion Delay
The parameters are essentially the same as in “Overdrive Delay,” with the exception
of the following two.
Overdrive Drive Distortion Drive
Overdrive Pan Distortion Pan