Filter
Top Products
MIDI Implementation
28
●015e: Stereo Delay4
This is a stereo delay.
No Parameter Value Description
1
Delay Left
Mode
0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
2 Delay Left 0–127 1–1270 ms
Adjusts the time until the
delay sound is heard. (Hz)
3 Delay Left 0–21 note
Adjusts the time until the
delay sound is heard. (note)
4
Delay Right
Mode
0–1 ms, note
Settings of the Delay Right
The parameters are the same
as for the Delay Left.
5 Delay Right 0–127 1–1270 ms
6 Delay Right 0–21 note
7 Phase Left 0–1
Normal,
Inverse
Phase of the delay sound
8 Phase Right 0–1
9
Feedback
Mode
0–1
Normal,
Cross
Selects the way in which delay
sound is fed back into the
e ect. (See the gures above.)
10 Feedback #1 49–89 0–+80%
Adjusts the amount of the
delay sound that’s fed back
into the e ect.
11 HF Damp 0–17
200–8000 Hz,
Bypass
Adjusts the frequency above
which sound fed back to the
e ect is ltered out. If you
don’t want to lter out any
high frequencies, set this
parameter to Bypass.
12 Low Gain 0-30 -15–+15 dB
Gain of the low frequency
range
13 High Gain 0-30 -15–+15 dB
Gain of the high frequency
range
14 Balance #2 0-100
D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
15 Level 0-127 0–127 Output level
●015f: Stereo Delay5
This is a stereo delay.
No Parameter Value Description
1
Delay Left
Mode
0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
2 Delay Left 0–127 1–1270 ms
Adjusts the time until the
delay sound is heard. (Hz)
3 Delay Left 0–21 note
Adjusts the time until the
delay sound is heard. (note)
4
Delay Right
Mode
0–1 ms, note
Settings of the Delay Right
The parameters are the same
as for the Delay Left.
5 Delay Right 0–127 1–1270 ms
6 Delay Right 0–21 note
7 Phase Left 0–1
Normal,
Inverse
Phase of the delay sound
8 Phase Right 0–1
9
Feedback
Mode
0–1
Normal,
Cross
Selects the way in which delay
sound is fed back into the
e ect. (See the gures above.)
10 Feedback #1 49–89 0–+80%
Adjusts the amount of the
delay sound that’s fed back
into the e ect.
11 HF Damp 0–17
200–8000 Hz,
Bypass
Adjusts the frequency above
which sound fed back to the
e ect is ltered out. If you
don’t want to lter out any
high frequencies, set this
parameter to Bypass.
12 Low Gain 0–30 -15–+15 dB
Gain of the low frequency
range
No Parameter Value Description
13 High Gain 0–30 -15–+15 dB
Gain of the high frequency
range
14 Balance #2 0–100
D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
15 Level 0–127 0–127 Output level
●0150: Monaural Delay
A delay that provides a long delay time.
No Parameter Value Description
1 Delay Mode 0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
2 Delay Time 0–127 1–2540 ms
Delay time from when the
original sound is heard to
when the delay sound is heard
(Hz)
3
Delay Time
#1
0–21 note
Delay time from when the
original sound is heard to
when the delay sound is heard
(note)
4 Phase 0–1
NORMAL,
INVERSE
Phase of the delay (NORMAL:
non-inverted, INVERSE:
inverted)
5 Feedback 49–89 0–+80%
Proportion of the delay sound
that is to be returned to the
input
6 HF Damp 0–17
200–8000 Hz,
Bypass
Frequency at which the
high-frequency content of
the delayed sound will be cut
(Bypass: no cut)
7 Pan 0–127 L64–63R Panning of the delay sound
8 Low Gain 0–30 -15–+15 dB
Amount of boost/cut for the
high-frequency range
9 High Gain 0–30 -15–+15 dB
Amount of boost/cut for the
high-frequency range
10 Balance #2 0–100
D100:0W–
D0:100W
Volume balance of the original
sound (D) and the delay sound
(W)
11 Level 0–127 0–127 Output volume