Filter
Top Products
MIDI Implementation
19
●0110: Overdrive
Creates a soft distortion similar to that produced by vacuum tube ampli ers.
No Parameter Value Description
1 Drive 0–127 0–127
Degree of distortion
Also changes the volume.
2 Amp Type #1 0–3
Small,
Built-In,
2-Stack,
3-Stack
Type of guitar amp
Small: small amp
Built-In: single-unit type amp
2-Stack: large double stack
amp
3-Stack: large triple stack amp
3 Low Gain 0–30 -15–+15 dB Gain of the low range
4 High Gain 0–30 -15–+15 dB Gain of the high range
5 Pan 0–127 L64–63R
Stereo location of the output
sound
6 Level #2 0–127 0–127 Output Level
●0111: Distortion
Produces a more intense distortion than Overdrive. The parameters are the same as
for “Overdrive.”
●0112: Overdrive2
This is an overdrive that provides heavy distortion.
No Parameter Value Description
1 Drive 0–127 0–127
Degree of distortion
Also changes the volume.
2 Tone 0–127 0–127
Sound quality of the Overdrive
e ect
3 Amp Sw 0–1 O , On
Turns the Amp Simulator
on/o .
4 Amp Type #1 0–3
Small, Built-
In, 2-Stack,
3-Stack
Type of guitar amp
Small: small amp
Built-In: single-unit type amp
2-Stack: large double stack
amp
3-Stack: large triple stack amp
5 Low Gain 0–30 -15–+15 dB Gain of the low range
6 High Gain 0–30 -15–+15 dB Gain of the high range
7 Pan 0–127 L64–63R
Stereo location of the output
sound
8 Level #2 0–127 0–127 Output Level
●0113: Distortion2
This is a distortion e ect that provides heavy distortion. The parameters are the same
as for “Overdrive2.”
●0107: Speaker Simulator
Simulates the speaker type and mic settings used to record the speaker sound.
No Parameter Value Description
1
Speaker Type
#1
0–15
(See the
table.)
Type of speaker
2 Mic Setting 0–2 1, 2, 3
Adjusts the location of the mic
that is recording the sound of
the speaker.
This can be adjusted in three
steps, with the mic becoming
more distant in the order of 1,
2, and 3.
3 Mic Level 0–127 0–127 Volume of the microphone
4 Direct Level 0–127 0–127 Volume of the direct sound
5 Level #2 0–127 0–127 Output Level
❍ Speci cations of each Speaker Type
The speaker column indicates the diameter of each speaker unit (in inches) and the
number of units.
Type Cabinet Speaker Microphone
Small 1 Small open-back enclosure 10 Dynamic
Small 2 Small open-back enclosure 10 Dynamic
Middle Open back enclosure 12 x 1 Dynamic
JC-120 Open back enclosure 12 x 2 Dynamic
Built-In 1 Open back enclosure 12 x 2 Dynamic
Built-In 2 Open back enclosure 12 x 2 Condenser
Built-In 3 Open back enclosure 12 x 2 Condenser
Built-In 4 Open back enclosure 12 x 2 Condenser
Built-In 5 Open back enclosure 12 x 2 Condenser
BG Stack 1 Sealed enclosure 12 x 2 Condenser
BG Stack 2 Large sealed enclosure 12 x 2 Condenser
MS Stack 1 Large sealed enclosure 12 x 4 Condenser
MS Stack 2 Large sealed enclosure 12 x 4 Condenser
Metal Stack Large double stack 12 x 4 Condenser
2-Stack Large double stack 12 x 4 Condenser
3-Stack Large triple stack 12 x 4 Condenser