Filter
Top Products
MIDI Implementation
26
●0122: Rotary
The Rotary e ect simulates the sound of the rotary speakers often used with the
electric organs of the past.
Since the movement of the high range and low range rotors can be set indepen-
dently, the unique type of modulation characteristic of these speakers can be
simulated quite closely. This e ect is most suitable for electric organ tones.
No Parameter Value Description
1 Speed #1 0–1 Slow, Fast
Simultaneously switch the
rotational speed of the low
frequency rotor and high
frequency rotor.
Slow: Slows down the rotation
to the Slow Rate.
Fast: Speeds up the rotation to
the Fast Rate.
2
Woofer Slow
Speed
1–127
0.05–10.00
Hz
Slow speed (Slow) of the low
frequency rotor
3
Woofer Fast
Speed
1–127
0.05–10.00
Hz
Fast speed (Fast) of the low
frequency rotor
4
Woofer
Acceleration
0–15 0–15
Adjusts the time it takes the
low frequency rotor to reach
the newly selected speed
when switching from fast to
slow (or slow to fast) speed.
Lower values will require
longer times.
5 Woofer Level 0–127 0–127
Volume of the low frequency
rotor
6
Tweeter Slow
Speed
1–127
0.05–10.00
Hz
Settings of the high frequency
rotor
The parameters are the same
as for the low frequency rotor
7
Tweeter Fast
Speed
1–127
0.05–10.00
Hz
8
Tweeter
Acceleration
0–15 0–15
9
Tweeter
Level
0–127 0–127
10
Separation
#2
0–127 0–127
Spatial dispersion of the
sound
11 Level 0–127 0–127 Output Level
●012d: Rotary2
This type provides modi ed response for the rotary speaker, with the low end
boosted further.
This e ect is a descendant of the Roland VK Series’ built-in rotary speaker.
No Parameter Value Description
1 Speed #1 0–1 Slow, Fast
Rotational speed of the
rotating speaker
2 Brake #2 0–1 O , On
Switches the rotation of the
rotary speaker.
When this is turned on, the
rotation will gradually stop.
When it is turned o , the
rotation will gradually resume.
3
Woofer Slow
Speed
1–127
0.05–10.00
Hz
Low-speed rotation speed of
the woofer
4
Woofer Fast
Speed
1–127
0.05–10.00
Hz
High-speed rotation speed of
the woofer
5
Woofer Trans
Up
0–127 0–127
Adjusts the rate at which the
woofer rotation speeds up
when the rotation is switched
from Slow to Fast.
6
Woofer Trans
Down
0–127 0–127
Adjusts the rate at which the
woofer rotation speeds up
when the rotation is switched
from Fast to Slow.
7 Woofer Level 0–127 0–127 Volume of the woofer
No Parameter Value Description
8
Tweeter Slow
Speed
1–127
0.05–10.00
Hz
Settings of the tweeter
The parameters are the same
as for the woofer.
9
Tweeter Fast
Speed
1–127
0.05–10.00
Hz
10
Tweeter
Trans Up
0–127 0–127
11
Tweeter
Trans Down
0–127 0–127
12
Tweeter
Level
0–127 0–127
13 Spread 0–10 0–10
Sets the rotary speaker stereo
image. The higher the value
set, the wider the sound is
spread out.
14 Low Gain 0–30 -15–+15 dB Gain of the low range
15 High Gain 0–30 -15–+15 dB Gain of the high range
16 Level 0–127 0–127 Output Level
●0300: Rotary Multi
This is an e ect combining the VK series internal e ect with an organ e ect with the
same features.
It comprises vibrato/chorus, overdrive, and rotary e ects.
No Parameter Value Description
1
Vib/Cho
Switch
0–1 O , On
Switches the vibrato and
chorus e ects
2 Vib/Cho Type 0–5
V-1, V-2, V-3,
C-1, C-2, C-3
Vibrato and chorus e ect
types
V-1, V-2, V-3: Adds a wavering
(vibrato) that is created by
changes in the pitch.The
e ect deepens as the value is
increased
C-1, C-2, C-3: Adds a fullness
and breadth (chorus) to the
sound.The e ect deepens as
the value is increased.
3
Vib/Cho
Vintage
0–2 `50, `60, `70
This reproduces the subtle
di erences in the vibrato and
chorus e ects in organs built
in di erent years.
4
Vib/Cho
Level
0–127 0–127 Vibrato/chorus e ect volume
5 OD Switch 0–1 O , On Switches the overdrive e ect
6 OD Drive #2 0–127 0–127 Amount of distortion
7 OD Level 0–127 0–127 Overdrive e ect volume
8
Rotary
Switch
0–1 O , On Switches the rotary e ect
9
Rotary Speed
#1
0–1 Slow, Fast
Low- and high-frequency
rotation speeds (Rate)
Slow: (Slow Rate)
Fast: (Fast Rate)
10 R-Wf Slow Sp 1–127
0.05–10.00
Hz
Rate with low-frequency rotor
set to Slow rate
11 R-Wf Fast Sp 1–127
0.05–10.00
Hz
Rate with low-frequency rotor
set to Fast rate
12 R-Wf Accel 0–15 0–15
Speed at which the low-
frequency rotor’s rotation rate
changes when the rotation
speed is switched
13 R-Wf Level 0–127 0–127 Low-frequency rotor volume
14 R-Tw Slow Sp 1–127
0.05–10.00
Hz
High-frequency rotor setting
This parameter is the same
as that for the low-frequency
rotor.
15 R-Tw Fast Sp 1–127
0.05–10.00
Hz
16 R-Tw Accel 0–15 0–15
17 R-Tw Level 0–127 0–127
18
Rotary
Separat
0–127 0–127
Amount of breadth in the
sound
19 Rotary Level 0–127 0–127 Output volume