Filter
Top Products
31Using the Memory
Hold down
7
(dot) or
9
(triplicate), then
press
1
through
6
to enter the lengths of
the notes.
To enter a tie, press
8
and enter the first
then the second notes.
To enter a rest, press
0
then use num-
bers
1
through
9
to specify the length of
the rest.
Correcting Mistakes
Before finishing your step recording en-
try, you can move the entry point back to
correct the data you entered. However,
this operation deletes all data after the
point where you make corrections.
1. Before you press
MEMORY
,
STEP
, or
START/STOP
to end recording, press
. This moves the entry point back
one “space.”
The data recorded at the current
entry point appears.
2. While monitoring the data on the
display, repeatedly press or to
move the entry point to the data you
want to change.
3. Press
+
and
–
at the same time.
Rewrite?
appears.
4. Press to clear all data after the
current entry point.
5. Press , ,
+
, or
–
to cancel the
rewrite operation. After that, you can
press or to move the entry point
to another location if you want.
Note:
TrackEnd
appears if you
press at the end of the recording.
RECORDING MULTIPLE
TRACKS
In addition to Track 1, where you record
auto accompaniment as well as key-
board play, there are five other melody
tracks that you can use to record melody
parts only. You can record different
tones on these tracks and build a full en-
semble of instruments.
You can play back what you already re-
corded on Track 1 (or any other track)
while you record on Tracks 2–6.
Real-Time Recording
1. Repeatedly press
MEMORY
until
Rec. No.
appears.
2. Within 5 seconds, repeatedly press
+
or
–
to select a song number.
3. Press the desired
CHORD
button (
2
–
6
) to select the track you want to
record on.
Note:
Check the display for Chan-
nels 11–16 to see which memory
tracks contain data and which are
empty.
4. If desired, you can change these
settings:
• tone number
• tempo (to a tempo that is easy for
you to follow)
5. Press
START/STOP
to start record-
ing. The contents of any tracks
already recorded start to play.
6. Play on the keyboard what you want
to record on the selected track.