Filter
Top Products
29Using the Memory
• Turning off the keyboard while
recording erases the contents of the
track you were recording.
• You can transfer memory contents
to another MIDI device.
PLAYING BACK FROM
MEMORY
1. Repeatedly press
MEMORY
until
Play No.
appears.
2. Within 5 seconds, use
+
or
–
(or
0
or
1
) to select a song number.
3. Within 5 seconds, press
START/
STOP
to play back the song you
selected. You can use
TEMPO
to
adjust the playback tempo.
4. Press
START/STOP
again to stop
playback.
Notes:
• You can use layer and/or split during
memory playback.
• You can change the rhythm during
playback.
• Pressing
START/STOP
during the
song restarts the song from the
beginning.
• You can set the volume and pan
position of the playback tracks using
the mixer. This setting data is output
through
MIDI OUT
.
• The entire keyboard functions as a
melody keyboard during playback,
regardless of the
MODE
setting.
STEP RECORDING
With step recording, you can record a
chord progression one chord at a time.
Before you start, read these tips. (If you
want to record one note at a time, refer
to “Recording Multiple Tracks” on
Page 31.)
• To start accompaniment with an
intro pattern, press
INTRO
after
SYN-
CHRO/ENDING
in Step 6 of “Step
Recording.”
• To switch to a rhythm variation,
press
VARIATION/FILL-IN
immedi-
ately before entering the chord in
Step 6 of “Step Recording.”
• To insert an ending or fill in, press
SYNCHRO/ENDING
or
NORMAL/FILL-
IN
(
VARIATION/FILL-IN
for variation
rhythm) immediately before entering
the chord in Step 6 of “Step Record-
ing.”
• To step-record chords without a
rhythm, skip Step 5 of “Step Record-
ing.” The chord of the specified
length is recorded. A rest can be
specified there, so you can create
an original chord pattern.
• To add chord accompaniment dur-
ing rhythm play, enter rests from the
beginning of the recording up to
where you want accompaniment to
start. Then enter only the chords (no
rests).
Follow these steps to record chords with
step recording.
1. Repeatedly press
MEMORY
until
REC.No.
appears.
2. Within 5 seconds, repeatedly press
+
or
–
to select a song number.