Filter
Top Products
3-5SectionWiring and Connections
43
2. Pull the terminal block out of the Board.
3. Insert each lead wire into the terminal block and tighten that terminal’s
screw.
4. After wiring the terminal block, insert the block into the Unit and tighten the
screws at the left and right sides of the terminal block.
Removing and Wiring I/O Connectors
The following tables provide specifications of compatible OMRON I/O connec-
tors.
MIL 20P Flat Cable Connector
Note The max. rated current for flat cable is 1 A. Be sure that the
current at the common terminal does not exceed 1A.
XG4T-2004
Strain Relief
XG4M-2030
Socket
XG4M-2030
Set
Flat cable: XY3A-200j