Nintendo TWLSWDB1 Video Game Console User Manual


  Open as PDF
of 55
 
Using the Stylus and Touch Screen
13
Basics
14
Basics
The lower LCD screen, or Touch Screen, is touch sensitive. For games that include this game control feature,
operate the screen by using the included stylus. Lightly touch or slide the stylus across the Touch Screen as
shown below.
IMPORTANT STYLUS AND SCREEN GUIDELINES:
• UsethestylusONLYontheTouchScreen(lowerscreen).
• Useonlyenoughpressuretooperatethegame.Excessivepressuremaydamagethe
Touch Screen.
• Donotusethestylusifitisbroken.
• UseonlyaNintendolicensedstylusontheTouchScreen.
• Replacethestylusinthestylusholderwhennotinuse.
• IfyouuseascreenprotectoronyourNintendoDS,useonlyaNintendolicensedscreen
protector, anduse it only on the Touch Screen.
IMPORTANT: If the Touch Screen becomes dirty or contaminated with foreign material, do not
continue to use your Nintendo DSi. It may not work properly and can become more damaged.
Follow the cleaning procedures below. If it still does not work after cleaning, visit www.
nintendo.com for information on repair service.
YoucanadjusttheTouchScreenifitdoesn’tseemtorespondproperlyoriftheTouchScreenisnot
respondingtothesameplaceyou’retouchingit.
NOTE: If you have applied a commercially available screen protector to your Touch Screen, be sure it has
been applied correctly before attempting to calibrate the Touch Screen.
1. Select System Settings from the Nintendo DSi Menu.
2. Select screen number 3 by tapping the #3 box at the top of the screen or by tapping the arrow on
the right side of the screen until you see the screen with the Touch Screen option.
3. Select the Touch Screen option and follow the on-screen instructions.
If you’re still unable to operate the Touch Screen properly...
Try starting up your Nintendo DSi at the Touch Screen Calibration screen by following the procedure below.
1. While holding down the L Button, R Button
and START...
2. PressPOWER.(HolddowntheL,R,andSTARTButtons
untiltheCalibrationscreenappears.)
3. Follow the on-screen instructions and then turn the power o. Turn the system on again to
check the operation of the Touch Screen.
If the screens on your Nintendo DSi have visible smudges, ngerprints, or other foreign material on them,
you can clean them by using a soft clean cloth such as a lens or eyeglass cleaning cloth.
1. SlightlydampentheclothwithwaterONLYandwipeothescreenstoloosenanydirtorforeign
material.
2. Using a dry cloth, wipe the screens to dry them and nish the cleaning process. If needed, repeat the
process.
Using the Nintendo DSi Stylus
Calibrating the Touch Screen
Screen Cleaning Procedure
 previous next