Filter
Top Products
II
Safety Instructions
SMARTBOX™ Controller for HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev14
Safety Instructions
PLEASE READ THESE INSTRUCTIONS AND THE ENTIRE MANUAL PRIOR TO INSTALLATION.
Safety Icons
The following symbols identify dangers associated with the installation, use or
ownership of the SMARTBOX™ Controller. When you see these symbols, please be
aware of the potential for personal injury or property damage.
WARNING indicates a hazard that could result in death,
personal injury or property damage.
CAUTION indicates a hazard that could result in property
damage.
IMPORTANT: PLEASE TAKE NOTE
PROFESSIONAL INSTALLATION: REQUIRED
TIP: Helpful information to ease the installation
Important Safety Instructions
This manual contains important safety instructions that
should be followed during the installation and maintenance
of this product. Be sure to read, understand and save these
safety instructions.
General Safety Instructions
• All electrical work must be done in accordance with all applicable local, national,
and/or international electrical codes.
• Before installing or using this device, read all instructions and cautionary
markings located in (or on) this guide, the unit, the batteries, turbine and any other
equipment used.
• This product is designed for indoor mounting only. Do not expose this unit to rain,
snow or liquids of any type.
• To reduce the chance of short-circuits, use insulated tools when installing or
working with the unit or any DC source (such as PV, hydro, wind, or batteries).
• Remove all jewelry when installing or working with the unit or any DC source. This
will greatly reduce the chance of accidental exposure to live circuits.
• The unit contains more than one live circuit (batteries and turbine). Power may be
present at more than one source.
• This product contains no user-serviceable parts.