Casio CDP-220R Video Games User Manual


 
English
Sampling Sounds and Playing Them on the Digital Piano
E-21
You can apply various effects to sampled sounds.
1.
Press
bp
(TONE) and then use
br
(10-key) to
enter the tone number (701 to 705) to which you
want to apply effects.
2.
Press
bp
(TONE) to cycle through the available
effects, described below.
Avoid assigning the same sampled sound (tone number
701 to 705) to the keyboard for play along and for looped
play. Doing so will cause, the Loop 1 effect to be applied to
the keyboard tone while looped play of the sampled sound
is being performed.
You can use the procedure to change the drum sounds that
are assigned to each keyboard key.
You can store up to three drum sets and store them as tone
numbers 706, 707, and 708. Simply select the tone number
where the drum set you want is located to assign the drum
set sounds to the keyboard.
1.
Press
bo
(RHYTHM).
2.
Press
bp
(TONE) and then use
br
(10-key) to
enter the tone number (706, 707, or 708) for the
drum set whose sounds you want to change.
3.
Press
bs
and
bt
at the same time.
Applying Effects to a Sampled Sound
Effect Type
(Display)
Description
Original (Orgnl)
Normal sampled tone (no looping, no
effect).
Loop 1 (Loop1) Loops the sampled sound.
Loop 2 (Loop2)
Loops the sample sound and raises the
pitch of the resonating sound when the
keyboard key is released.
Loop 3 (Loop3)
Loops the sample sound and lowers the
pitch of the resonating sound when the
keyboard key is released.
Pitch 1 (Ptch1)
Changes the pitch from low to high, at an
increasing rate.
Pitch 2 (Ptch2)
Changes the pitch from high to low, at a
decreasing rate.
Pitch 3 (Ptch3)
Changes the pitch from high to low, at a
decreasing rate, and then raises the pitch
when the key is released.
Tremolo (Treml) Alternates volume between high and low.
Funny 1 (Funy1)
Adds vibrato and changes the pitch by a
gradually increasing amount.
Funny 2 (Funy2)
Alternates between high pitch and low
pitch.
Funny 3 (Funy3)
Adds vibrato and changes the pitch from
low to high.
Incorporating a Sampled Sound
into a Drum Set (Drum Sampling)
No Da t a
Lights
No Da t a
Flashes