54
SECTION VIII
TECHNICAL INFORMATION
The following section contains various technical information important to the service person in servicing and
maintaining the dryer.
A. MOTOR PLATE (HIGH and LOW VOLTAGE)
The motor plate is located on the side of the drive motor (refer to illustration) and contains a graphical representation
of the motor wiring for both low and high voltage ratings.
Removing the cap reveals the wiring to the motor. On each wire there is a number which corresponds to the
numbers on the motor plate. Depending on whether the dryer is operating on low or high voltage, the wiring
should match the motor plate as follows:
The dots and lines represent connections (refer to illustration).
For example:
On low voltage - wire no. 14 is connected to wire no. 4
- wire no. 1 is connected to wire no. 7, which in turn are both connected to L1
On high voltage - wire no. 14 is insulated or capped
- wire no. 4 is connected to wire no. 7
- wire no. 1 is connected to L1