Filter
Top Products
12
G. TUMBLER (BASKET) BEARING
and PULLEY ARRANGEMENT
The tumbler (basket) bearing and pulley arrangement
is located (viewing from the rear of the dryer)
approximately at the upper center of the dryer. The
arrangement consists of a pulley and two (2) bearings
which serve to drive, adjust, and support the tumbler
(basket).
H. TUMBLER (BASKET)
The tumbler (basket) consists of four (4) ribs and four
(4) perforated panels, along with a front and back, which
are screwed together as an assembly. The tumbler
(basket) also consists of tie rods, which support the
tumbler (basket) from front to back. The tumbler
(basket) support is used to mate the tumbler (basket)
to the drive system in the rear.
I. MAIN DOOR SWITCH
The main door switch is mounted to the front panel behind the main door. When
the main door opens, the switch will also open, preventing the dryer from operating.
The main door switch is a safety device and should never be disabled.