Filter
Top Products
14
M. LINT DRAWER
The lint drawer is a pull-out type and is located at the
bottom of the dryer in the lint compartment. Simply
grab the lint drawer handle, slide out the drawer, brush
off the lint, and slide the drawer back in. The lint screen
must be kept clean in order for the dryer to operate
properly and efficiently.
N. LINT DRAWER SWITCH
The lint drawer switch is located in the lint compartment
and attached to the side of the lint drawer track. The
lint drawer switch insures that the dryer will operate
only when the lint drawer is completely closed. This is
a safety device and should never be disabled.
O. STEAM DAMPER SYSTEM
The newest type system is called the steam
damper. It is shown to the right and it uses
a piston with compressed air to open and
close the steam damper which in turn allows
the air to flow either through the coil for
heat, or under the coil for cool down. Air
supply is 80 PSI +/- 10 PSI (5.51 bars +/-
0.69 bars).