Interface
Specifications
This section provides specifications for the
DFX8000’s
parallel and
serial interfaces. For specifications on optional interfaces, see their
manuals.
WARNING: The
DFX-8000
has a parallel interface, a serial
interface, and a slot for-an optional interface. To avoid
damaging the printer, do not connect cables to the parallel
interface and the optional interface at the same time. Also
do not plug cables into all three interfaces at the same time.
However, you can connect cables to the serial interface and
the
parallel
interface or the serial interface and the optional
interface at the same time.
The following table provides the parallel interface connector pin
assignments and describes their interface signals.
Signal
Pin
1
Wurn
Pin
Signal
Dkectk~
i-t
19
m
IN
I
I
20
DATA
1
IN
21
DATA
2 IN
22 DATA
3
IN
23 DATA
4
IN
24 DATA
5
IN
25 DATA
6
IN
26 DATA
7
IN
27
DATA
6 IN
Description
STRQBE
pulse to read data. Pulse width
rnd
be more than 0.5 microseconds at
the
fieceiving
terminal.
Theqe
signals represent information of the
1st
tD
9th
bits of parallel data, respectively.
Each
signal is at HIGH level when data is
logidal
1 and LOW when it is logical
0.
Technical Specifications
8-11
