A SERVICE OF

logo

Using Short Tear-Off
When you are finished printing, you can use the short tear-off
feature to feed the perforation of your paper to the printer’s tear-off
edge. Then you can easily tear off the last printed sheet. When you
resume printing, the printer feeds the paper
backward
to the top of form
position. This saves the paper normally lost between
documents.
The steps below describe how to use the short tear-off feature.
The following steps also show you how to adjust the position of the
perforation so that it meets the printer’s tear-off
edge
if
you need
to. If you set a new tear-off position, the printer remembers the
new setting even after the printer is turned off, reset, or initialized.
(The printer remembers separate tear-off positions for front and rear
tractors.)
!!!!?I
WARNING:
Never use the
TEAR OFF
button with labels,
or when the optional pull tractor is installed.
1.
Make sure that the printer is turned on and that it is off line.
Also be sure the desired tractor is selected (the corresponding
tractor arrow should be lit).
2..
Open the paper separator cover (the flap on the top part of the
printer’s top cover). This exposes the printer’s tear-off edge.
3-40
Using
the Printer