Interface Boards
Compatible interfaces
The following table lists Epson interfaces that are compatible with
the
DFX-8000.
Some of these interfaces may not be available in
your country or region and some may be no longer available.
Number
#8143
#8148
#8165
Name
New Serial interface
board’
Intelligent
serial interface board
Intelligent
IEEE-488 interface board
Coax interface board
Twinax
interface board
l
For more information on the New Serial interface
(#8143),
see page
5-39.
All Epson interface boards have the Epson name on them. If there is
an identification code on the board, it should be one of the four-
digit numbers in the table above.
Installing an
intirface board
The following steps explain how to install an optional interface
board. Before you install an interface board, set the DIP switches or
jumpers on the board according to the instructions in your
computer and interface
board manuals.
Note:
Before you install an interface board, be sure your printer’s
DIP switches are set for use with a parallel interface, even if you
are installing a serial interface board.
see!
the section on setting
the DIP switches in Chapter
3.
Using the Printer Options
5-33
