A SERVICE OF

logo

27
| P a g e © Adam Equipment Company 2011
This group of parameters is used to control the operation of the scale.
Parameter
Description Options Default
setting
S1 Un Enable or disable
weighing units, will not
allow to disable all units,
at least one has to be
enabled. Parts counting
can be enabled/disabled
Kg
Grams
lb
oz
lb:oz
N (Newtons)
PCS
Kg
S2 bL Backlight set to always
on, always off or
automatic on whenever
a weight is placed or a
key is pressed
EL oFF
EL on
EL AU
EL AU
S3 AoF Auto Off- Disable or set
time increment to turn
off scale
SLP 0
SLP 1
SLP 5
SLP 10
SLP 0
S4 dt Set Time and Date
format and settings.
Format for date can be
changed when the
display shows mmddyy,
ddmmyy or yymmdd by
pressing the [Pcs/]
key, then enter the date.
Enter the time
manually.
Enter the date
format and then the
numeric value
manually.
00:00:00
mm:dd:yy
S5 diS Display all weights or
only when stable
ALL
StAb
ALL
S6 Fi Filter setting to slow,
normal or fast
SLow
nor
FASt
nor
S7 SPS Password Enter new pass word
twice,, controls
access to Func 1 to
Func 4
Not active
S8 CAL Calibration Calibrate the scale.
See Section 11.0
-