19
| P a g e © Adam Equipment Company 2011
6.7 PERCENT
WEIGHING
The scale can be set to perform percent weighing. See Section 7.2.
The scale will use a mass on the platform as the 100% reference weight. If
the platform is empty (or the scale is tared) then the user can input a
reference weight using the keypad.
• Press [Func/C]. The first option is “FunC 1”, press the [Func/C] key
again display “FunC 2”.
• Press the [Z/T] key. “P1 PCt” will be displayed.
• Press [Z/T] again to enter percent weighing. The scale will set the
sample mass on the platform as 100% reference weight.
• Remove the sample weight. Then any other weight placed on the scale
will be displayed as a percentage of the original sample. For example,
if 3500g is placed on the scale and percent weighing is selected, the
display will show 100.0%. Remove the 3500g weight and place a 3000g
weight. The display will show 85.7% as 3000g is 85.7% of 3500g.
• The number of decimal points will depend on the weight used in
