9
| P a g e © Adam Equipment Company 2011
4.0 KEY
DESCRIPTIONS
[>Z/T<]
If near zero, Sets the zero point for all subsequent
weighing. The display shows zero.
Tares the scale. Stores the weight currently on the
scale as tare value, subtracts the tare value from the
gross weight and shows the results
A secondary function, is of “Enter” key used when
setting up the value for the Parameters.
[Pcs/] Selects parts counting. Used to set the sample
quantities while parts counting.
A secondary function, is of incrementing the active
digit when setting a value for Parameters.
[Unit/]
Selects the weighing unit to be displayed from those
which are enabled. See parameter S1 in section 7.4.
A secondary function, is to move the active/flashing
digit to the left when setting values for Parameters.
