A SERVICE OF

logo

74
| Page © Adam Equipment Company 2009
Some plastics also are not suitable for this type of method due to the very low
percent moisture and the heat required to extract this moisture.
KNOW THE MATERIAL
In addition it is important to know enough about the materials so that you do
not endanger or inconvenience others. For example some solvents have
very low flash points that are not suitable for drying with heat sources that
can reach 100ºC. Other materials will cause odour or fumes that will be
dangerous or objectionable, consider drying fertilizer slurry without using a
vent to extract the odour.