A SERVICE OF

logo

38
| Page © Adam Equipment Company 2009
8.3 RECALLING
TEST RESULTS
When a test result has been stored in the analyzer memory it can be recalled
to the display.
During normal weighing mode press the [Dspl] key. The display shows
Pressing the [Dspl] or [Test] will change the option to PRINT, DELETE or
DELETE ALL.
When the selection shows PRINT , press [Setup/Enter] and the display will
show the first stored test result using the file name given it when stored.
Press the [Dspl] or [Test] key to change the file name to the next available.
When the test result desired is found press the [Setup/Enter] Key to recall
the details and print them in the same format they were stored in, See section
11.0
Pressing [Tare] will return the analyzer to normal operation.
8.4 DELETING
TEST RESULTS
When a test result has been stored in the analyzer memory they can be
deleted individually or all at one time.
PRINT
RES00032