A SERVICE OF

logo

Open as PDF
next previous
45
| Page © Adam Equipment Company 2009
10.1.2 SETUP PARAMETERS
The user parameters that control the analyzer are shown under the SETUP.
When “SETUP” is displayed, press the [Setup/Enter] key. The options for
each parameter can be scrolled through by using the [Up] or [Down] keys.
TIME Set Time using the numeric entry method
(see section 6.1)
DATE FORMAT
EUROPE (dd/mm/yy)
USA (mm/dd/yy)
ASIA (yy/mm/dd)
Select the format the date will be shown
in.
DATE Set Date using the numeric entry method
(see section 6.1)
Set year, month date when requested.
USER ID Enter a user number to identify this
analyzer
KEY BEEPER
When enabled will beep any time a key is
pressed.
On= Enable
OFF= Disable
TEST BEEPER When enabled will beep 3 times quickly
when a drying test is completed.
On= Enable
OFF= Disable
BACKLIGHT
On
OFF
AUTO
FILTER Set the amount of filtering used for