76
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
[2]: 配置 Traps 主机 IP 地址和体字符串
[3]: 配置交机 SNMP 状
[4]: 配置交机 Traps 状
[5]: 添加 SNMP 管理站安全 IP 地址
[6]: 返回上一菜
序号:
Select “0” in the SNMP configuration menu and press Enter, the following screen will appear:
Please input the read-write access community string[private]:
The corresponding prompt in Chinese is:
入 SNMP 写体字符串[private]:
Note: valid length for a read-write access community string is 1 to 255 characters, the default value
is “private”. When a valid read-write access community string has been entered, pressing Enter to
returns to the SNMP configuration menu.
Select “1” in the SNMP configuration menu and press Enter, the following screen will appear:
Please input the read-only access community string[public]:
The corresponding prompt in Chinese is:
入 SNMP 只体字符串[public]:
Note: the valid length for a read-only access community string is 1 to 255 characters, the
default value is “public”. When a valid read-only access community string is entered, press Enter to
return to the SNMP configuration menu.
Select “2” in the SNMP configuration menu and press Enter, the following screen will appear:
Please input traps-host IP address(A.B.C.D):
The corresponding prompt in Chinese is:
入接收 Traps 的主机 IP 地址(A.B.C.D):
When users enter a valid IP address for Traps host and press Enter, the following appears:
Please input traps community string[public]:
The corresponding prompt in Chinese is:
入通信体字符串[public]:
Note: valid length for a traps community string is 1 to 255 characters, the default value is “public”.
When a valid traps community string has been entered, press Enter to return to the SNMP
configuration menu.
