73
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
[0]: Add telnet user
[1]: Config telnet server status
[2]: Exit
Selection number:
The corresponding prompt in Chinese is:
配置 Telnet 服器
[0]: 添加 Telnet 服器用
[1]: 配置 Telnet 服器的状
[2]: 返回上一菜
序号:
Select “0” in the Telnet server configuration menu and press Enter, the following screen will appear:
Please input the new telnet user name :
The corresponding prompt in Chinese is:
入要添加的 Telnet 用名:
Note: Valid username length is 1 to 16 characters. When a user enters a valid username and presses
Enter, the following screen will appear:
Please input the new telnet user password:
The corresponding prompt in Chinese is:
入用密:
Note: Valid password length is 1 to 8 characters. After configuring the username and password, the
menu will return to the Telnet server configuration section.
Select “1” in the Telnet server configuration menu and press Enter, the following will screen appear:
Enable switch telnet-server or no?(y/n) [y]:
The corresponding prompt in Chinese is:
是否使能交机 Telnet 服器?(y/n) [y]:
Type “n” and press Enter to disable Telnet service. Type “y” and press Enter, or just press Enter to
