74
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
enable Telnet service. The Telnet server configuration menu will then appear.
Select “2” in the Telnet server configuration menu to return to the Setup main menu.
3.1.2.4 Configuring Web Server
Select “3” in the Setup main menu and press Enter to start configuration of the Web server:
Configure web server
[0]: Add web user
[1]: Config web server status
[2]: Exit
Selection number:
The corresponding prompt in Chinese is:
配置 Web 服器
[0]: 添加 Web 服器用
[1]: 配置 Web 服器的状
[2]: 返回上一菜
序号:
Select “0” in the Web server configuration menu and press Enter, the following screen will appear:
Please input the new web user name:
The corresponding prompt in Chinese is:
入要添加的 Web 用名:
Note: valid username length is 1 to 16 characters. When a valid username is entered, press Enter to
bring up the following prompt:
Please input the new web user password:
The corresponding prompt in Chinese is:
入用密:
