145
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
configuration.”
Words and phrases of “user configuration” are explained in the following:
z FTP Server state－status of the server. (“Open” or “Close”.) Please refer to the CLI command
5.5.2.2.5.
z FTP Timeout－the timeout. Please refer to the CLI command 5.5.2.2.6.
z User name－the name of the user. Please refer to the CLI command 5.5.2.2.8.
z Password－the specific password. Please refer to the CLI command 5.5.2.2.7.
z State－display the status of the password. “Plain text” means proclaimed display and
“encrypted” means “encrypted” display. Please refer to the CLI command 5.5.2.2.7.
z Remove user－to remove a user. Please refer to the CLI command 5.5.2.2.8.
z Add user－to add a user. Please refer to the CLI command 5.5.2.2.8.
Example: open the TFTP server, input the username “switch” and password “switch”, and then click
“Apply.”
5.6.4 Maintenance and debug command
Users should click “Switch basic configuration” and “Basic configuration debug” to enter into the
configuration page and make configuration nodes, which include the following segments:
z Debug command－a debugging command.
z Show clock－to display the current time. Please refer to the CLI command 5.2.4.1.
z Show flash－to display FLASH files. Please refer to the CLI command 5.2.4.3.
z Show history－to display the latest inputted commands. Please refer to the CLI command
5.2.4.4.
z Show running-config－to display the current status of parameters configuration. Please refer
to the CLI command 5.2.4.6.
z Show switch port interface－to display properties of VLAN ports. Please refer to the CLI
command 5.2.4.8.
z Show tcp－to display the current TCP connection with the switch. Please refer to the CLI
command 5.2.4.9.
z Show udp－to display the current UDP connection with the switch. Please refer to the CLI
command 5.2.4.10.
z Show telnet login－to display the Telnet client messages connected through Telnet with the
switch. Please refer to the CLI command 5.2.4.11.
