Filter
Top Products
274
Troubleshooting
There is no sound.
, Check that the volume is not set to zero. Try raising the volume
( pages 161, 165).
, Check that the mute setting is not on. Press the sound button on the system
front to clear the mute setting ( page 177).
, If headphones are inserted, the system will not produce any sound through
the speakers.
, See also "There is no sound, or the sound quality from the headphones is
poor." ( page 278).
The volume does not turn up.
, Check that the AVLS feature is turned off. When turned on, the AVLS
feature limits the maximum volume of the headphones ( page 242).
Sound quality is poor.
, If the system is used in an area where there are vibrations, or if it is near
strong magnetic objects such as a television, the sound may be distorted and
there may be increased background noise. Try moving the system to a
different location.
The system does not recognize the UMD®.
, Check that the UMD
® is properly inserted (label is facing the system rear,
etc.). Try taking out the UMD
® and reinserting it.
, Check that the UMD
® recorded surface is clean. If not, wipe it gently with
a soft cloth ( page 158).
The UMD® doesn't play properly.
, If moisture condensation occurs, remove the UMD
® from the system and
do not use the system for several hours until the condensation evaporates
( page 158).
Sound
UMD®