Filter
Top Products
166
Preparing the PSP® system for use
Before using the PSP® system for the first time after purchase, you must follow
these steps to charge the battery.
Before inserting the battery pack, find the serial and model numbers listed
within the battery compartment and make a record of the numbers in the spaces
provided under Owner's Record on page 146.
1 Remove the battery cover.
2 Insert the battery pack.
3 Replace the battery cover.
Preparing the PSP® system for use
Getting started 1: Inserting the battery pack
UMD
PUS
H
Hold down the push button and slide
the battery cover open.
UMD
PUS
H
P
Align the bottom surface of the
battery pack with the system to
attach.
UMD
PUS
H
2 Slide the battery cover in the
direction of the arrow until it
locks firmly into place.
1 Align the tabs.