Filter
Top Products
133
Additional information
GB
Troubleshooting
The Web page won't display properly
, Some Web pages may not display properly.
There is no sound or the sound quality from the headphones is
poor.
, Check that the headphones are fully inserted into the system ( page 26).
, Check that the headset connector and the headphone plug are clean. If not,
wipe them with a dry, soft cloth. See also "There is no sound".
The remote control does not work.
, Check that the headphones are fully inserted in the system ( page 26).
, Check that the remote control is not in hold mode. If it is, clear hold mode
( page 22).
The system or AC adaptor is warm.
, During use, the system or AC adaptor may become warm. This is not a
malfunction.
The system is turned on, but does not operate.
, Check that the system is not in hold mode. If it is, slide the power/hold
switch up to clear hold mode ( page 33).
, Try sliding the power/hold switch up and holding until the power indicator
turns off. The system will be completely turned off. Then turn on the system
again.
The system does not function properly.
, Static electricity and other similar occurrences may affect the system's
operation. Remove the battery pack and AC adaptor, wait for about 30
seconds, and then restart the system.
Headphones with remote control
Other issues