Filter
Top Products
To delete all pairing information, see “What can I do to solve a problem?”
[Details]
Notes
For details, refer to the operating instructions supplied with the BLUETOOTH
device.
When pairing with a BLUETOOTH device that cannot display a list of detected
devices or that has no display, you may pair the device by setting both the
headset and the BLUETOOTH device to pairing mode. At this time, if passkey is
set besides “0000” on the BLUETOOTH device, pairing cannot be done with the
headset.
Once BLUETOOTH devices are paired, there is no need for pairing again,
except in the following cases:
Pairing information is deleted after repair, etc.
The headset is paired with 9 or more devices. The headset can be paired with
up to 8 devices; if a new device is paired after 8 devices have been paired, the
device whose latest connection time is the oldest among the 8 paired devices
is replaced by the new one.
When recognition of the headset by the device to be connected is deleted.
The headset is initialized. All pairing information is deleted.
Copyright 2013 Sony Corporation
41