Filter
Top Products
Premium 200Mbps Powerline AC Pass-Through AV+ Adapter - RPLC-200PKIT- User’s Manual
-28-
Appendix D: RPLC-200P QoS Support
RPLC-200P allows for 4 levels of Channel Access Priority (CAP (0 – 3)). The 8 levels
of VLAN Ethernet tags must be mapped to the 4 levels of CAP priority, where CAP 3
is the highest priority and CAP 0 is the lowest. CAP 3 priority might be used for voice
and network management frames, and CAP 2 is used for streaming HD video and
music while CAP 1 and CAP 0 are used for data.
Default CAP
The „Default CAP‟ group allows for default priority mapping of packets that do not
have a VLAN TAG. The settings are available for Unicast (directed to a host).
Unicast - (default CAP 1) - sets the default channel access priority for
unicast frames not matching any other classification or mapping.
IGMP managed Multicast Stream (Fixed to CAP 2) - sets the default
channel access priority for stream data belonging to a snooped IGMP
multicast group.
IGMP - (default CAP 3) - sets the channel access priority for IGMP frames -
these are the group management frames, not the stream data.
Multicast/Broadcast - sets the default CAP for multicast frames not in a
snooped group and for broadcast frames.
The following are the factory fixed settings for QoS Priority:
1st: Network Management Frames and Voice
2nd: Video and Music Streaming
3rd: Data Streaming
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete
warranty information and future support for your product.
Rosewill Customer Service Hotline: 1-800-575-9885
Rosewill Customer Service Support: techsupport@rosewill.com