Filter
Top Products
Premium 200Mbps Powerline AC Pass-Through AV+ Adapter - RPLC-200PKIT- User’s Manual
-20-
Devices A and B are located in different networks. Users want to use them to
form a logical network.
In this case, using the Security pushbutton cannot pair Devices A and B. Users
can only use the Utility to form a logical network.
Please follow below to form a logical network using the Utility:
1. Connect Device A to the network card of a PC.
2. Open the Utility. The Main tab page displays information about Device A
after connection succeeds.
Search for Local device on your computer
3. Click the Privacy tab page. Enter a name in the Private Network Name field.
Setting the network name for your PLC
4. Click Set Local Device Only. When the following page is displayed, the
setting succeeds. Now Device A has been removed from its logical network.