Filter
Top Products
Premium 200Mbps Powerline AC Pass-Through AV+ Adapter - RPLC-200PKIT- User’s Manual
-16-
making the local devices not to communicate to the devices which are in the old
logical network. Click Set Local Device Only, the devices previously set up with
the same logical network (same network name) appears in the device list.
Set All Devices
This button is used to change the logical network of all devices that appear in
the main panel. If these devices whose passwords have been entered for the
same logical network, a dialog box appears, indicating the success of this
operation. For the devices whose passwords are not entered, this operation will
fail and it will report a failure message.
2.2.3 Diagnostics Tab
The Diagnostics screen shows the system information and history of all remote
devices appeared over a period of time.
The Upper panel shows technical data concerning software and hardware on the
host computer that are used to communicate through HomePlug on the powerline
network. It includes the following:
Operating system platform/version
Host network name
User name
MAC address of all NICs (Network interface card) connected to the host
Identify versions of all driver DLLs and libraries used (NDIS) and optionally
HomePlug chipset manufacturer name (Turbo Only devices)
MAC firmware version (Turbo Only devices)
MAC addresses of all devices connected locally to the host
Version of the configuration utility
Vendor name