Premium 200Mbps Powerline AC Pass-Through AV+ Adapter - RPLC-200PKIT- User’s Manual
-14-
A confirmation box appears if the password is entered correctly. If a device is not
found, a message appears, providing suggestions to solve the common
problems. This process might take a few seconds to get completed.
Add
This button is used to add a remote device to the existing network by entering
the device password of the device. A dialog box will appears. You can enter a
device name and the password. (Also refers as DEK on the back Label, this
DEK is generates via MAC address)
If the device is found and the password is entered correctly, a confirmation box
appears. If a device is not found, a message appears, providing suggestions to
solve the common problems.
Note:
The device must be in the powerline (plugged in), so that you can confirm the password and add
the device to the network. If the device is not located, a warning message appears.
Scan
This button is used to perform an immediate search for HomePlugAV devices
connected to the powerline network. By default, the utility automatically scans