Filter
Top Products
Premium 200Mbps Powerline AC Pass-Through AV+ Adapter - RPLC-200PKIT- User’s Manual
-19-
Chapter 3 Forming a Powerline Network
This chapter describes how to form a HomePlug AV logical network (AVLN) using the
Security pushbutton and using the Utility. Operation progress and outcome can be
monitored by observing the behavior of the power LED.
3.1 Using the Security Pushbutton
Scenario:
Devices A and B with different NMK (Network Membership Key used to
authenticate/access) values are connected to the same powerline. Users want
to use them to form a logical network.
Forming a HomePlug AV logical network
Please follow below steps to form a logical network using the Security button:
1. Press the Security button on Device A for less than 3 seconds.
2. Press the Security button on Device B for less than 3 seconds. The button
on B must be pressed within 2 minutes
3. Wait for connection to complete.
The Power indicator on both devices will flash evenly at 1 second interval until
the operation succeeds or fails. The Power indicator will illuminate steadily on
successful completion. If an error occurs, the Power indicator on both devices
will flash unevenly for 2 minutes.
3.2 Using the Utility
Scenario: