Filter
Top Products
2726
Using Wii Remote Controllers
Using Wii Remote Controllers
Using the Wii Remote Jacket
• Be sure that the Wii Remote Jacket is installed prior to gameplay to reduce the risk of harm to
the remote, surrounding objects, or people�
It might be necessary to remove the Wii Remote Jacket - for example, to replace the batteries in
the Wii Remote controller� If you do remove the Wii Remote Jacket, be sure to put it back on
before further play�
Installing Batteries in the Wii Remote
Pull the jacket from the base of
the controller and pull the wrist
strap out�
Pull the jacket up to expose the entire
battery cover and remove the cover�
Insert the batteries, negative (–) end
first� When removing batteries, remove
the positive (+) end first�
Replace the battery cover and pull the
wrist strap back through the hole in the
bottom of the jacket� Pull the jacket
back over the base of the controller�
Sensor Bar Placement Guidelines
Center the sensor bar with the
TV screen, facing straight ahead�
• Do not place the sensor bar over air
vents on the TV�
Place the sensor bar to slightly
overhang the front surface of
the TV screen�
Place the sensor bar on the
same surface as the TV�
Recommended Play Environment
For the best results when using the Wii Remote controller:
• The front of the sensor bar should be directly in front
of you and clearly visible
• Avoid blocking the signal between the remote and the
console or sensor bar
• Sit (or stand) directly in front of the TV, between 3 and
10 feet (1-3m) away
• Avoid bright light sources behind or near the TV
If the Wii Remote is not operating properly, see Wii
Remote and Sensor Bar in System Settings on the Wii U
Menu to make adjustments, or review “Wii Remote
Controllers” in Troubleshooting (p� 53)�