Filter
Top Products
9
47” ESPRESSO GAMING TV STAND
www.insigniaproducts.com
Step 3
:
Attach the top to the left end
1 Identify the rounded edge on the left end (B) and the top (F) and the finished edge on the upright (E). Make sure
these edges face the same direction.
2 Place the top (F) face down, then insert the cam dowels on the left end (B) into the holes on the top (F). The side
of the left end (B) that has the hidden cams should face the center of the top (F). Use a Phillips screwdriver to
tighten the two hidden cams in the left end (B).
3 Insert two metal pins (HH) in the upright (E), then insert the other ends of the metal pins into the holes in the
top (F).
HH
Surface with
holes
Rounded edge
Finished edge
Rounded
edge
Arrow
210°
S
u
r
f
a
c
e
w
i
t
h
h
i
d
d
e
n
ca
m
s
190°
You’ll need:
HH (2)
Phillips screwdriver
NT-13SGAM_14-0248_MAN_V1_ENG.fm Page 9 Thursday, May 1, 2014 11:22 AM