Filter
Top Products
16
47” ESPRESSO GAMING TV STAND
www.insigniaproducts.com
Step 10: Install the skirt brackets and the foot
1 Fasten three metal brackets (DD) to the bottom (G) and front skirt (K) using two black 9/16" large head
screws (NN) per bracket.
2 Fasten the foot bracket (BB) to the bottom (G) using three black 9/16" large head screws (NN).
3 Slide the two center feet (T) onto the foot bracket (BB).
4 Use two black 9/16" large head screws (NN) to fasten the foot bracket (BB) to the center feet (T).
Note: There are no pre-drilled holes in the center feet (T). The screws tighten into the grooves.
5 Insert the corner cap (AA) into the grooves in the center feet (T).
DD
DD
DD
BB
AA
NN
NN
NN
NN
NN
NN
DD
NN
NN
NN
NN
NN
NN
You’ll need:
Phillips screwdriver
AA (1)
BB (1)
DD (3) NN (11)
NT-13SGAM_14-0248_MAN_V1_ENG.fm Page 16 Thursday, May 1, 2014 11:22 AM