Filter
Top Products
15
47” ESPRESSO GAMING TV STAND
www.insigniaproducts.com
Step 9: Install the skirts
1 Insert a metal pin (HH) into each end of the front skirt (K).
2 Align the front skirt (K) to the front edge of the bottom (G), then insert the ends of the metal pins into the feet (R
and S). Make sure that the finished edges face up and toward the front.
3 Fasten the side skirts (L) to the bottom (G) by inserting two black 9/16" large head screws (NN) through each
corner bracket (CC). Tighten the screws.
HH
NN
NN
CC
NN
NN
NN
NN
CC
CC
NN
NN
CC
NN
NN
CC
Holes should be here
F
i
n
i
s
h
e
d
e
d
g
e
Unfinished
edge
You’ll need:
Phillips screwdriver
HH (2)
NN (8)
NT-13SGAM_14-0248_MAN_V1_ENG.fm Page 15 Thursday, May 1, 2014 11:22 AM