Filter
Top Products
18
47” ESPRESSO GAMING TV STAND
www.insigniaproducts.com
Step 12: Assemble the drawer
1 Insert the tab on the right drawer side (D16) at an angle into the slot on the right side of a drawer front (M). The
tab should easily fit into the slot. Gently tilt the drawer side (D16) from side to side until the tab slips into the
slot. Repeat to fasten the left drawer side (D17) to the left side of the drawer front (M).
2 Slide a drawer bottom (D720) into the grooves in the drawer sides (D16 and D17) and drawer front (M).
3 Repeat this step to make the other drawer.
*U.S. Patent No. 6,413,007
D16
D17
D720
D16
D16
D17
Tab
Slot
Groove
Unfinished surface
The tabs should insert freely
into the slots. Gently tilt the
drawer sides from side to
side until the tabs slip into
the slots.
Be sure the drawer
bottom inserts
into the drawer
front groove.
NT-13SGAM_14-0248_MAN_V1_ENG.fm Page 18 Thursday, May 1, 2014 11:22 AM