Filter
Top Products
22
47” ESPRESSO GAMING TV STAND
www.insigniaproducts.com
Step 16: Install the metal shelf pins and the drawers, and attach the warning label
1 Carefully stand your TV stand upright.
2 Push the rubber sleeves (II) over the four remaining metal pins (HH). Insert the metal pins into the hole locations
of your choice in the left end (B) and left upright (D). Set the adjustable shelf (J) onto the metal pins.
3 Tip the front of a drawer down and drop the rollers on the drawer behind the rollers on your TV stand. Lift the
front of the drawer up and slide it into your TV stand. Repeat for the other drawer.
4 Push a cam cover (GG) onto each visible hidden cam.
5 Apply the warning label (JJ) to an area on the top (F) so that the TV will hide the label. Peel off the backing and
apply the label as shown in the diagram.
HH
II
JJ
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death
can occur. The TV and furniture will be
unstable and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to sit
completely on this shelf.
Place the roller on the slide
behind the roller on the rail.
Note: This is a permanent
label intended to last for
the life of the product.
After you apply the label,
do not try to remove it.
You’ll need:
Phillips screwdriver
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death
can occur. The TV and furniture will be
unstable and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to sit
completely on this shelf.
GG (4)
HH (4)
JJ (1)
II (4)
NT-13SGAM_14-0248_MAN_V1_ENG.fm Page 22 Thursday, May 1, 2014 11:22 AM