Filter
Top Products
Getting Started Connections Playback Specifications
Basic Operations Memo Function
(27) Version No:The DN-S1200’s software version is displayed. (SYSTEM / DSP)
(28) Touch Int.:The Adjust the Scratch disc.
1) Press the PARAMETERS knob and select “Touch Int”.
“Cancel” flashes on the character display.
2) Turn the PARAMETERS knob to display “OK”.
3) Press the PARAMETERS button.
“Touch Initial!” is displayed once initialization is completed.
4) Once clearing is completed, “Completed!” is displayed.
(29) Preset Int:Set all the preset data back to the factory defaults.
1) To clear the PRESET data, push the PARAMETERS button. “Preset Int?” flashes on the character
display.
2) Push the PARAMETERS button again. “Preset Initial!” is displayed on the character display while
data clearing.
3) Once clearing is completed, “Complete!” is displayed.
Compatible Files
The files that can be played using an external USB memory device are as shown below.
NOTE
• Depending on the type of MP3 encoding software, with some files noise may be generated or it may not
be possible to play the file.
• Recordings you make are for your personal use and should not be used in ways infringing upon the
copyright holder as per copyright laws.
• With MP3 files, the files cannot be played if the pitch is 24% or greater.
MP3/WAV FORMAT
MP3 Format
MPEG-1 Audio Layer-3 40-320kbps f/s 44.1kHz, ,STEREO
ID-3 Tag
V1.0, V1.1, V2.2, V2.3, V2.4
(ASCII + ISO8859-1(West European))
Encording C.B.R, V.B.R.
WAV Format
PCM 16bit f/s 44.1kHz
Metadata Tag
Supported by Denon DJ Music Manager, Audio Grabber,
Dragon Tagger
.m3u and .xml playlists are supported only through DENON DJ Music Manager.
Utility