Filter
Top Products
Getting Started Connections Playback Specifications
Memo Function Utility
Basic Operations
Playback and Pause
Operations
1
Press the 13 button to start playback.
The 13 button lights green during playback.
2
When the 1 3 button is pressed during playback,
the pause mode is set at that position.
The 13 button flashes.
b Press the 13 button again to resume playback from
the point at which it was paused.
3
If the Scratch disc is held down during
playback when the JOG MODE button is set
to “SCRATCH”, playback is paused.
b Playback resumes when the scratch disc is released.
Playback and CUE
During playback, press the CUE button.
Playback stops and cues to the point where playback
started (the cue point).
b This function is called “Back Cue”.
• The Back Cue function can be used to always start playback from the
same position.
• The CUE button lights red when the back cue mode is set.
The cue point is set or changed in the following cases:
• When playback is started from the pause mode
• When a new file is selected
• When the cue point is set in the manual search mode
Selecting tracks
Turn either the PARAMETERS knob or the Scratch disc.
b Refer to “Selecting the Track on the CD to be Played (vpage 9)”
or “Selecting the Track to be Played by USB (vpage 9)”.
Moving the cue point
If you want to start playback in the middle of a track, use the quick
jump, fast search or manual search function to move the cue point.
1
Use the FAST SEARCH button to nd the position
from which you want to start playing.
Press and release the 6 7 button immediately
to jump 10 seconds forward or backward from the
current position.
Press and hold in the 6 7 button to fast-forward or fast-
reverse.
b The jumping time for the quick jump function can be selected at
“PRESET” – “(6) Jump Time”. Refer to “PRESET” (vpage 27).
2
Press the JOG MODE button and select
“BEND/SEARCH”.
3
Turn the Scratch disc in the standby or
pause mode to move the cue point 1
frame at a time while listening to the
playback sound.
4
When the CUE button is pressed, the new cue point is
set.
Press the JOG MODE button again to
set the Scratch disc back to the scratch
mode.
Changing the playing speed (pitch)
The playing speed (pitch) can be adjusted using the pitch slider.
The key adjust function makes it possible to keep the key constant,
regardless of the playing speed (pitch).
1
Press and immediately release the PITCH/
KEY button.
The mode switches between pitch on and key adjust
on each time the button is pressed.
b The PITCH indicator lights when the pitch on mode is set, the
“KEY ADJ.” indicator lights when the key adjust mode is on.
2
The playing speed is adjusted when the pitch slider is
moved.
3
Press the RANGE button for at least 1 second.
4
Turn the PARAMETERS knob to select the
pitch range.
The DN-S1200 offers six pitch ranges: 4%, 10%,
16%, 24%, 50% and 100%.
5
Press the PARAMETERS button to set.
Basic Operations
NOTE
With MP3 files, the files cannot be played if the pitch is 24% or
greater.