Filter
Top Products
0
Getting Started Connections Playback Specifications
Memo Function Utility
Filter Parameter Setting
1
o
Press the FILTER button.
When the FILTER button is pressed, the FILTER button
lights and the parameters setting screen is displayed.
b When filter indicator is solid (not blinking), press the FILTER button
to set the filter parameter selection mode again.
2
Q0 Use the
FILTER button or scratch disc to set the
lter parameters.
The FILTER button and PARAMETERS
button flash while the parameters are
being set.
b The Feedback Level can be set with the Scratch
disc, while the Echo Delay Time can be set with
the PARAMETERS knob.
3
Q1 Press the
PARAMETERS
knob or the JOG MODE
button to turn off the parameters setting screen.
4
Q2 Press the
FILTER
button while the filter settings
screen is displayed.
Turning the filter off.
Platter Effects
Brake Operating Time Setting
This simulates a turntable gradually slowing and stopping
playback.
1
Q3
Press the BRAKE button.
When the BRAKE button is pressed, the brake mode is
turned on, and the BRAKE button and PARAMETERS
button flash for about 3 seconds to indicate the brake operating
time.
2
Q4 Turn the
PARAMETERS
knob to set the brake
operating time.
The operating time is set and the operating time
setting mode is canceled.
b If no operation is performed for about 3 seconds
after the first time the BRAKE button is pressed or
the adjustment is performed with the PARAMETERS
knob, selection of the brake operating time is canceled
automatically.
Operating the Brake
1
During playback, press the
13
button.
2
To cancel brake operation, press the
1 3
button
again during brake operation.
Brake operation is canceled.
n Turning the brake mode off
Q5 Press the
BRAKE
button while the brake is operating.
The brake mode turns off.
Basic Operations