Filter
Top Products
Connections Playback Specifications
Basic Operations Memo Function Utility
Display
q w e r t y u i o
Q0Q1Q2Q3Q4Q5Q6
q Play position indicator
The position of playback is indicated by the
elapsed time, in white when in the normal
play mode, in orange when in the reverse play
mode.
When the time to the end of the track (file) is
less than the specified time, the play position
indicator flashes according to the remaining
track time (EOM) to indicate the end of the track
(file).
or Left arrow only on:
Hot Start mode
Both arrows on:
Seamless Loop mode
,
Both arrows flashing:
Seamless Loop Playing
,
Left arrow on, right flashing:
Exit play from Seamless Loop
w Loop mode indicators
DN-S1200 has Loop mode indicators which
consist of A , B and two arrows.
A and B marks indicate A and B points have been
set.
Two arrows indicate loop setting mode as
follows.
r File data indicator
This indicates the file’s format.
t D-Link connection confirmation indicator
This lights when D-Link connection has been
confirmed.
y Keyboard connection indicator
Deck for which keyboard is effective is now
displayed.
u KEY ADJ. indicator
KEY ADJ. indicator appears in display when the
Key Adjust mode is ON.
i Scratch marker
This turns according to the playing status of the
different decks.
Use this as an indicator for scratching and other
JOG operations.
The character display section indicates the
operation, mode name, data, etc. “>> ” is
indicated at the side of the displayed data.
When “>> ” is flashing, this indicates that the
item at that row is selected.
o MEMO indicator
This indicates whether or not there is memo
data.
When in the play or standby mode, the “MEMO”
indicator lights if there is memo data for the
current track. In the playlist search mode in
the USB mode, the indicator flashes if there is
memo data for the selected playlist.
In the CD mode when D-Link is possible, the
“MEMO” indicator flashes if data is stored in
the USB memory connected to the other DN-
S1200.
Q0 Pitch display
This indicator display the playback speed (pitch).
Q1 BPM indicators
Lights when the BPM is displayed on the pitch
display.
Q2 Play mode indicators
When “SINGLE” indicator lights up, playback
will finish at end of current file.
When “CONT.” indicator lights up, playback
continues.
Q3 Minute, second and frame displays
These displays indicate current position
information.
Q4 Time mode indicators
When the TIME button is pushed, the Time
mode indicator switches as follows.
ELAPSED: File’s elapsed time is displayed.
REMAIN: File’s remaining time is
displayed.
T. ELAPSED: The total elapsed time of Playlist
is displayed.
T. REMAIN: The total remaining time of
Playlist is displayed.
Q5 Track indicator
The number of the currently playing track is
displayed here when in the playlist or CD mode.
Q6 SOURCE display
This displays the device currently selected for
the different decks.
Getting Started
e Character display section
With the DN-S1200, mode selection and other
operations can be performed following the
character display and using the PARAMETERS
knob.
The PARAMETERS indicator flashes when data
can be entered using the PARAMETERS knob.