Filter
Top Products
18
Note: To exit calibration mode at any time, press the FN and C key, again.
No calibration information will be saved until the entire calibration mode has
been completed.
QUICK KEY REFERENCE GUIDE
Bluetooth:
1. Searching Last Device (Bluetooth icon blinking).
2. Searching New Device (Bluetooth icon blinking).
3. Successful Pairing (Bluetooth icon solid).
4. Disconnected (Bluetooth icon not visible).
USB Connection: U will be displayed when USB cord is plugged into computer.
Bluetooth will have preference over the USB connection. Press FN and W on the
Virtual Keyboard to override and connect to USB, even when a previously paired
Bluetooth device is in range.
Adjusting Sound (FN and S): Volume level bars will appear.
Adjusting Key-press Sensitivity (FN and K): Sensitivity level bars will appear.
Adjusting Brightness (FN and B): Brightness level bars will appear.
Calibration (FN and C): Must press C twice – or holding on/off for 10 seconds
1. Shows two icons on top flashing for user to hold the F1 and F12 keys on the
first row (beeps for success). Hold down finger for 3 seconds.
2. Shows two icons on bottom flashing for user to press the outside keys on the
bottom row (FN and right arrow). Hold down fingers for 3 seconds (beeps for
success) then goes back to home screen.
796246_INS_Virtual Keyboard
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk